American Standard 1340.119.002 Pillar Tap Metering Faucet W/ Extended Spout, 0.5 Gpm, Chrome

Product Features

• 0.5 GPM/ 2.27 LPM
• Monoblock with cast brass spout: 5-3/8" (138 mm) reach
• Meets ADA Standard: Requires less than 5 lbs. of operating force to initiate flow per ANSI A117.1
• Single Supply: For cold or tempered water
• Adjustable Flow Cycle
• Replaceable Valve Cartridge: Facilitates simple replacement.
• Flexible Supply Hose: With 3/8" Compression Connection
• Lead Free: Faucet contains = 0.25% total lead content by weighted average
• 5 Year Limited Warranty for Commercial Installations CODES AND STANDARDS These products meet or exceed the following codes and standards:
• ANSI A117.1
• ASME A112.18.1
• CSA B 125
• Single handle design
• NSF 61/Section 9 and Annex G
• 22" long flex supply with 3/8" compression fitting
• Optional grid drain, mixing valve and deck plates available (sold separately)
• Water Conserving 0.5 gpm Pressure-Compensating VR Non-Aerated Spray
• Meets CALGreen: Delivers 0.083 gallons per cycle which is a 59% water savings from CALGreen baseline
• Pressure Compensating Non-Aerated Spray: Provides a constant water flow of 0.5 gpm throughout the pressure range
• Vandal-Resistant Brass Construction and Spray: Durable - Excellent in high use applications
• Automatic Shut-off: Stops water and energy waste. Ideal for public restrooms where uncontrolled water usage is costly