Elkay DW1012522MR2 Elkay DW1012522MR2 Dayton Stainless Steel Single Bowl Sink Pack

Product Options

Elkay DW1012522MR2 Dayton Stainless Steel Single Bowl Sink Pack

SKU: 239447

We are Sorry we no longer carry this item.

Check below for similar items!

About the Elkay DW1012522MR2 Dayton Stainless Steel Single Bowl Sink Pack

The Elkay DW1012522MR2 Dayton Stainless Steel Single Bowl Sink Pack. This sink should be ordered in multiples of 10. This nickel-bearing stainless steel sink is designed for a top mount installation. The Elkay DW1012522MR2 Single Bowl Sink is from the Dayton Collection, designed for efficiency and functionality. Its overall dimensions are 25" in length with 22" in width and 6-9/16" in depth while the bowl is 21" long, 15-3/4" wide and 6-3/8" deep. This sink has 2 faucet holes. The 3-1/2” drain opening is located at the center of the bowl (refer to the specification sheet). The exposed surfaces of this #22-gauge sink have been polished to a satin finish. The bottom of the bowl is sprayed for sound deadening and to prevent condensation. The Elkay DW1012522MR2 Dayton Sink complies with ASME A112.19.3/ CSA B45.4 and is listed by the International Association of Plumbing and Mechanical Officials as meeting the requirements of the Uniform Plumbing Code and the National Plumbing Code of Canada. Made in the USA and covered by a Limited Lifetime Warranty by Elkay, a trusted leader in the industry.

Manufacturer: Elkay
Number of Holes: 2 Hole
Room: Kitchen
Other Info: Drain Not Included
Use: General use
Material Gauge: 22 Gauge
Product Collection: Dayton
Number of Bowls: One Bowl
Color: Stainless Steel
Length: 25
Depth: 6-9/16"
Width: 22"
Mpn # DW1012522MR2
Weight 9.90 lbs.
  • Highest quality sink formed of #22 gauge stainless steel.
  • Type 300 nickel bearing stainless steel.
  • Top mount.
  • This sink comes in Master Packs of 10 sinks nested with rim wrappers.
  • Requires a minimum of 30” cabinet size.
  • Bowl Depth: 6-3/8 inches deep.
  • Exposed surfaces are polished to a Satin finish.
  • Undercoated on the bottom of the bowl.
  • The drain opening is 3-1/2 inches (89mm).
  • Sink complies with ASME A112.19.3/ CSA B45.4.
  • This sink is listed by IAPMO as meeting the applicable requirements of the Uniform Plumbing Code, International Plumbing Code, and National Plumbing Code of Canada.
  • This sink is compliant to ADA and ANSI/ICC A117.1 accessibility requirements when installed according to the requirements outlined in these standards.

Reviews

Question and Answers

Have a question about this product?

Plumbersstock.com
Shopper Award