Elkay DXUH3118DF Dayton Stainless Steel Double Bowl Sink Package

SKU: 240507
$364.01/ea
Save 52% · Retail: $754.00

   Available to Ship in 1-2 weeks

About the Elkay DXUH3118DF

The Elkay DXUH3118 Dayton Stainless Steel Double Bowl Sink. This nickel-bearing stainless steel sink is designed for an under mount installation. The Elkay DXUH3118 Double Bowl Sink is from the Dayton Collection, designed for efficiency and functionality. Its overall dimensions are 31-3/4" in length and 18-1/4" in width while both left and right bowls are 14" long, 15-3/4" wide and 8" deep. This sink has no faucet hole. The 3-1/2” drain openings are located at the center of each bowl (refer to the specification sheet). The exposed surfaces of this #18-gauge sink have been polished to a radiant satin finish. The sides and bottom of the bowl are fully sprayed for sound deadening and to prevent condensation plus it has sound-dampening pads. The Elkay DXUH3118 Dayton Sink complies with ASME A112.19.3/ CSA B45.4 and is listed by the International Association of Plumbing and Mechanical Officials as meeting the requirements of the Uniform Plumbing Code and the National Plumbing Code of Canada. Made in the USA and covered by a Limited Lifetime Warranty by Elkay, a trusted leader in the industry.

Product Details

Other Info: Drain Included
Number of Handles: Single handle
Room: Kitchen
Faucet Spray: Side Spray
Faucet Handle Type: Lever Handle
Material Gauge: 18 Gauge
Product Collection: Dayton
Mount Type: Under Mount
Manufacturer: Elkay
Number of Bowls: Two Bowls
Color: Stainless Steel
Mpn # DXUH3118DF
Dimensions 0 " X 0 " X 0 "
Weight 27.55 lbs.

Product Features

  • Highest quality sink formed of #18 gauge stainless steel
  • Type 300 nickel bearing stainless steel.
  • Under mount.
  • Requires a minimum of 36” cabinet size
  • Bowl Depth: 8”.
  • Exposed surfaces are polished to a Radiant Satin finish.
  • This sink is designed to affix easily to the underside of any solid surface countertop.
  • Sound dampening pads with spray undercoating to dampen sound and reduce condensation.
  • Each sink is furnished complete with a faucet - LK1501CR and 2 Drains.
  • Faucet features chrome finished, single-lever kitchen faucet with pull-down spray with braided stainless steel supply lines. Three 1-3/8” diameter faucet holes are required. Its max counter thickness is 2.5” (63mm). Faucets comply with ADA, ANSI/NSF61, ASME A112.18.1/CSA B125.1, cUPC, CA AB1953 while the faucet flow rate is 1.5 GPM/5.7 L/min at 60 P.S.I.G.
  • The drain features a stainless steel body and strainer. Fits 3-1/2” (89mm) opening.
  • Sink complies with ASME A112.19.3/ CSA B45.4
  • This sink is listed by IAPMO as meeting the applicable requirements of the Uniform Plumbing Code , International Plumbing Code , and National Plumbing Code of Canada.

Reviews

Plumbersstock.com
Shopper Award