Greenlee UT4 Cable Puller Assembly (4,000lbs)

Product Features

• Two pulling speeds to match the job
• SOC (Snap-On Connector) Adapter Is Used On All Power Meters And B Series LED Sources
• Continuous Pulling Force : Low Speed 3000.000 LB (1364.000 KG)
• Drive Motor : 1-1/4 HP, 120 VAC, 60 HZ
• Electrical Plug : 120 V, 15 AMP
• Foot Switch : Standard
• Force Gauge : Standard
• High Pulling Speed : No Load: 26 FPM (8 MPM), 2000LB (909 KG) : 20 FPM (6 MPM)
• Low Pulling Speed : No Load: 13 FPM (4 MPM), 2000LB (909 KG) : 10 FPM (3 MPM)
• Maximum Pulling Force : High Speed 2000 LB, Low Speed4000 LB
• Optional Long Boom Extension : 12.000 FT (3.600 M) Maximum
• Quick Latch system attaches to the outside of threaded and unthreaded conduit without the need for adapters
• Pulling Capability : 3 X 750 KMIL Cable 600.000 FTWith 2 X 90 DEG Bends, 4 X 350 KMIL Cable 400.000 FT With 4X 90 DEG Bends, 3 X 500 KMIL Cable 400.000 FT With 3 X 90 DEG Bends
• Pulling Rope : 9/16 IN Diameter Double Braided Composite (16000 LB MinimumBreaking Strength)
• Standard Boom Extension : 8.000 FT (2.400 MR) Maximum
• Sub Brand : Ultra Tugger
• Weight : 175.000 LB (80.000 KG)
• Quick Set-Ups & Tear Downs- roll it to the job, adjust the boom and nose & attach it to the conduit
• Boom extends to 8'. A 12' boom extension accessory is available
• Integral foot operated on/off switch
• Nose can be turned for up,down & side pulls
• Rolls easily between job locations
• Available floor mount accessory for use in tight spaces
• Patented