Honeywell SP970A1013/U Manual Or Minimum Position Pressure Regulator

Product Features

• Manual Pressure Regulator
• The setpoint knob normally rotates 188 degrees. Two breakaway stops on the knob allow rotation of 244 degrees and 300 degrees.
• Panel or Wall
• 5 to 95% RH
• Output Span--5 psi with 188 degree knob rotation, 6.5 psi with 244 degree knob rotation and 8 psi with 300 degree knob rotation
• Output Span--34 kPa with 188 degree knob rotation, 45 kPa with 244 degree knob rotation, and 56 kPa with 300 degree knob rotation
• Used to manually position a remote damper actuator or reset setpoint of pneumatic controller
• Three-port pneumatic manual or minimum position switch
• Barb fitting for 5/32 in. (4 mm) O.D. plastic tubing
• 0.021 scfm (9.4 mL/s) below minimum position. Above minimum position, device feeding pilot determines capacity
• 0.022 scfm (9.8 mL/s)
• 1 1/2 in. diameter x 3 in. deep
• 38 mm diameter x 76 mm deep
• 30 psi, maximum
• 207 kPa, maximum
• 0 F to 140 F
• -18 C to +60 C
• Knob, 0 to 100% scale plate and locknuts