Honeywell YL7220SJ3103/U Enthalpy With Communicating Dca

Product Features

• Fault detection and diagnostic capabilities with alarms for failed sensors and communicating actuator
• Economizing
• Energizes one or two supplemental exhaust fans during operation, complete with exhaust cycle setpoint
• Demand Control Ventilation (DCV) CO2 sensor varies the ventilation damper’s minimum ventilation position between two adjustable values
• Integrates with the space temperature control system recommended by the HVAC unit
• Surpasses UL 60730 and UL 94-5 plenum flammability tests
• 24 VAC; operates between -40° to 150° F
• 4.98 inches high x 6.3 inches wide x 1.34 inches deep
• -40 C to +65 C
• Compliant
• 2-10 Vdc to actuator
• Includes discharge or mixed air sensor to control mixing dampers
• Gray
• C7400S1000\C7250A1001
• W7220A1000 Logic Module, C7400S1000 OAE Sensor, C7250A1001 MAT Sensor, MS3103J1030 DCA OA Sylk
• Complies with California Title 24
• 126.4 mm high x 160 mm wide x 34mm deep
• Honeywell Series 72 actuators; C7232
• 50 Hz; 60 Hz
• UL94-5V; CE; C-tick
• 5 to 95% RH, non-condensing
• 30 Vac-- 1.5 A Run, 3.5 A Inrush
• DCV on/off and exhaust fan on/off Actuator status
• 24 Vac
• -40 F to -150 F
• CO2 level in space
• Return air temperature
• Outdoor air temperature
• Mixed air temperature
• Calls for cooling from room controller
• Occupancy