*PLUMBERSSTOCK EXPERT* responded:
HI! Thank you for your inquiry on the Kohler K-T8232-4-CP Taboret faucet trim. To remove the handle, please refer to these instructions: Remove the end caps from both ends of the lever, turning counterclockwise by hand or with a strap wrench, taking care to protect all finish surfaces. Remove the setscrews from inside the handle with a 1/8" hex wrench. Lift off the center post to expose the screw. Remove the Philips screw and any remaining components to expose the valve. Set parts aside for re-use. The valve can now be replaced or other repairs made. Reassemble parts in reverse order. Better yet, refer to this page. For additional support on troubleshooting this Kohler product, please check out this page. We hope this helps you! Should you have further questions, please ask away! Thank you for visiting Plumbersstock.com. Have a great day!