Saniflo 011 Sanipack Macerator Pump For In-wall Tank System

Product Features

• A 1/2 HP pump system.
• Uses 10 V – 60 Hz / 4.5 Amps (Max).
• Has a 0.5 HP oil-filled thermally protected motor.
• With 45 microfarad capacitor rating.
• Operating Temperature is 104 F° (110 F° Max).
• Power cord length: 48 inches.
• At 53 dBA (Lp) (measured at 3 feet) noise level.
• Can install a complete bathroom up to 15 feet below the sewer line, or even up to 150 feet away from a soil stack
• Incorporates a macerating system which can handle human waste and toilet paper in residential applications.
• The blade is made out of a hardened stainless steel material which eliminates the need for any service or replacement.
• Discharges the waste through a 3⁄4 inch or 1 inch rigid pipe. A non-return valve is included on the discharge elbow assembly provided with the system.
• This elbow can be rotated 360 degrees depending on the discharge installation.
• Has been designed with a 1-1⁄2 inches vent connection on the top of the lid.
• This pump is designed to be connected to any wall-hung toilet with a minimum of 1⁄4 inch per foot gravity fall on the waste pipe coming from the toilet into the pump.
• Will also discharge gray water from any sink, shower or urinal. The wastewater will drain into the system via two 1-1⁄2 inches inlets with built-in check valves on either side of the housing.
• Requires two way vent connection
• Dimensions 11
• 3/4
• 13 Gallon Per Minute Discharge rate at 9 feet rise
• 115 Volt electrical supply required
• 3/10 HP Motor
• Two Year Limited Warranty