Shoemaker 1550-4X12 4X12 Driftwood Tan Vent Cover (Steel) - Shoemaker 1550 Series

4X12 Driftwood Tan Vent Cover (Steel) - Shoemaker 1550 Series

SKU: 127214

We are Sorry we no longer carry this item.

Check below for similar items!

About the 4X12 Driftwood Tan Vent Cover (Steel) - Shoemaker 1550 Series

This Driftwood Tan 4" x 12" Shoemaker 1550 Series Vent Cover is designed to fit and cover a 4" wide by 12" high opening. Shoemaker has a complete line of products designed for homes, offices, stores, and many other commercial applications. The quality and simplicity of this floor register are only two of the many reasons why Shoemaker Manufacturing leads the field in innovative air-grille design for real world applications. The Shoemaker 1550 Series Floor Register is designed with a honeycomb construction that has an anti-shock property, giving it optimum weight-to-load bearing capacity and bending strength that helps support foot traffic. This register has fixed bars at 0° deflection. The blades on this floor register run parallel to the longest dimension. The core and the frame are on the same level to provide a smooth appearance. The Shoemaker 1550 Series Floor register comes with a recessed screwdriver-operated opposed blade damper. It is used to regulate the airflow through linked sections of adjacent blades that rotate in the opposite direction. Compared to other damper types, an opposed blade damper maintains a more even airflow. It also provides better control over the airflow in all operating positions. A recessed screwdriver-operated damper prevents any unnecessary adjustments of the damper setting. The standard color of this grille is driftwood tan, but it is also available in soft white and designer colors. Unlike other products, Shoemaker grilles have a baked-on textured polyester powder coat that can resist scratches and does not wear or fade out easily. The Shoemaker Manufacturing Company leads the field in innovative air-grille design and it guarantees that its products are free from defective materials. Be sure to measure the hole opening size instead of measuring the face plate of your old grille. This grille is designed to fit over a 4" x 12" existing hole or duct. Refer to the Specification Sheet for more information.

Product: Vents and Terminations
  Air Grille and Registers
Manufacturer: Shoemaker
Use: Heating and A/C
  Ducting and Venting
Mpn # 1550-4X12
Weight 1.92 lbs.
  • 1550R - Reinforced Welded Core And Extra Support For Heavy Duty Application
  • Driftwood Tan
  • Flush Core And Frame Gives a Smooth Surface
  • Free Area Equals More Than 75 Percent of Nominal Size
  • Mounting Holes For Sidewall & Ceiling Application
  • Positive Volume Set Screw
  • Recessed Screwdriver Action Opposed Blade Damper To Control Air Volume For Positive Balance of System
  • Standard Color Or Designer Color Finish Available On This Product
  • Steel Honeycomb Build
  • 1550R - Reinforced Welded Core And Extra Support For Heavy Duty Application
  • Driftwood Tan
  • Flush Core And Frame Gives a Smooth Surface
  • Free Area Equals More Than 75 Percent of Nominal Size
  • Mounting Holes For Sidewall & Ceiling Application
  • Positive Volume Set Screw
  • Recessed Screwdriver Action Opposed Blade Damper To Control Air Volume For Positive Balance of System
  • Standard Color Or Designer Color Finish Available On This Product
  • Steel Honeycomb Build

Reviews

Question and Answers

Have a question about this product?

Plumbersstock.com
Shopper Award