Shoemaker DH100ACDCI Multi Blade Directional Diffuser In White With Damper

Product Features

• Size shown above is vent opening size not actual grille dimensions
• Many Shoemaker images are Stock Photos and may not represent exact product listed. See description for more product details
• 2-way Diffusers and Registers incorporate Vent Louvers that run parallel to first grille dimensions EX: 4x10 grille has 4" louvers; Return Air Grilles however have louvers that run Perpendicular to the first measurement
• 16 Ga. Galvanized Steel Channel Frame
• Dh100Acdc - Factory Installed Duct Smoke Detector (Minimum 20" Or 25" Sleeve Required)
• Fire and Smoke Damper with Optional Sleeve Styles
• Horizontal Mount For Tunnel Corridor Install
• Internal Mount Actuator (Minimum Damper 8X8", Minimum 18" Sleeve)
• Jackshaft: 1/2 Inch Diameter Zinc Plated Steel With Jackshaft Connector Coupling
• Linkage: .12 X .50 Zinc Plated Steel Concealed In The Channel Frame
• Max. Size: 24W X 24H
• Min. Size: 8W X 8H
• Nonobligatory Access Door Mounted In Sleeve
• Nonobligatory Sleeve Lengths And/Or Gauge
• 16 Ga. Galvanized Triple InchV Inch Formed Blades
• Parallel Blade Operation
• Pneumatic Actuator
• Power Open / Spring Closure
• Right Hand Mount
• Sintered Bronze, Oil Impregnated Bearings
• Stainless Steel Build
• Standard Actuator 120 Volt Mounted In "Right Front" Position
• Standard Sleeve (Type A) 20 Gauge, 18" Minimum
• UL And California State Fire Marshall Accepted
• UL Accepted Installation Instructions 1
• 165 Degree Fusible Link
• UL Accepted Installation Instructions 2
• UL Accepted Installation Instructions 3
• 24 Volt Actuator
• Axles: 1/2 Inch Square Zinc Plated Steel Studs
• Caulking, UL Approved Silicone Sealants: Dow Corning Rtv-732, 999A, Ge-1200
• Cfsd-111-1 - Class 1 Ultra Low Leakage (Minimum Size 12W X 8H, Maximum Size 24W X 24H)
• Class 2 (Low Leakage) Standard
• Csd-444 - Smoke Only Corridor Damper, Available Class 1 Or Class 2 Leakage Rating