American Standard M952100-0070AP Pressure Balance Unit

Hi there! Thank you for your query about the Stiebel Eltron DHC-E 12 water heater. To operate this heater, start by turning on the unit. Then, adjust the water temperature using the knob on the front of the unit. After adjusting the temperature to your desired level, turn on the hot water and wait approximately 20 seconds to stabilize the temperature. Then, check the water temperature using your hand. Make sure that the water is not too hot and reduce it if necessary. We recommend setting it to 100 to 155 degrees Fahrenheit. You can also refer to page 7 of its installation manual for more information. We hope this helps. Thank you for trusting PlumbersStock. Have a great day!

Hello there! Thank you for your question about the Stiebel Eltron DHC-E 12 water heater. This heater doesn't need regular maintenance. However, we recommend regularly removing the scale and dirt accumulated at the faucet's aerator or in the showerhead to maintain steady water flow. Furthermore, the heater's integrated filter requires regular cleaning. To do this, begin by turning off the water supply and removing the ground wire for safety. Next, turn the cold water supply line counterclockwise by 90 degrees and pull it down to detach it. Then, clean the screen well and reattach it, followed by reconnecting the cold water supply line and securing the ground wire in position. You can also refer to page 7 of its installation manual for more information. To purchase this electric water heater, simply click ”Add to Cart,” provide the required information, and we’ll take care of the rest. Thank you for choosing PlumbersStock. Have a fantastic day!