----- --- ------- ------- --- ----- -------- -------
$----.--
max
Ships from
--- ---, ---
Would you like to have a direct chat with an admin to help with your shopping needs?
Please make sure you understand the item and the dimensions before ordering.
By Clicking "Add to Cart", you acknowledge that this product is not eligible for returns
| Manufacturer: | Gerber |
| Mpn # | 28-990 |
| Weight | 36.00 lbs. |
The Gerber 28-990 is an exceptional toilet tank built for high-efficiency. With consistent performance and features that are offered at a reasonable value, this toilet component is tough to beat. This includes an ASME certified water-saving flush rate of 1.28 GPF or 4.8 LPF.
A pilot valve is used to quickly fill the tank with water. The accumulated water then gets strongly flushed out and into the bowl using a 3" flush valve and thoroughly clean your toilet bowl.
The Gerber 28-990 comes in several other colors and configurations including the Gerber 28-990-09 and the Gerber 28-990-25. The front tank lever is color-matched to show beauty in continuity. If you need the trip lever to be on the right-hand side, you have the option to get the Gerber 28-990-97.
The Gerber Maxwell collection is the starting line of performance. Gerber is at the forefront of creating sustainable commercial plumbing parts in the industry. With years of service and a full-fledged commitment to their consumers, they have made life better for a lot of people. Get your toilet, sink, and even your faucet from the producer of well-awarded plumbing fixtures. Get Gerber here at PlumbersStock.com.
If you would like to be notified when we answer your question please log in or enter your email below. If not please leave the email blank and press submit thank you.
Hi there! Thank you for asking about the Gerber 28-990 toilet tank. No, the 21-928 bowl works with this tank. However, it is not yet available on our site. Kindly contact one of our knowledgeable customer support specialists at 435-868-4020 from 7 AM to 7 PM MST (Mon-Fri) or through support@plumbersstock.com and see if they can get it for you. You may also inquire about Expedite Shipping if you need the bowl immediately. You may view the specification sheet for your reference. To purchase, click Add to Cart and fill in the fields required. Thank you for contacting PlumbersStock. Have a nice day!
Hi! We highly appreciate your interest in the Gerber 28-990 toilet tank. To replace the flapper of this toilet tank, please follow the steps below:
1. Take the tank lid off of the tank.
2. Turn off the water supply.
3. Drain the water in the toilet tank.
4. Remove the old flapper. First, remove the chain or strap of the flapper from the tank lever arm. Move one of the flapper's arms out toward the post and then slide the hole at the end of the arm over the "L" portion of the post and then lift up and away from the post. Then, just do the same for the other side.
5. Clean the seal area.
6. Install a new flapper. by sliding the hole at the end of the flapper's arm down over and onto the "L" shaped post. Then, slide the arm toward the overflow tube. Then, just do the same for the other side.
7. Attach the chain or strap to the lever arm.
8. Turn the water supply back on.
9. Put the tank lid back.
We hope this information proves helpful. Thank you for trusting PlumbersStock. Have a great day!
Hi, there! Thank you for posting a query concerning the Gerber 28-990 tank. No, this tank is for the Gerber 21-928 elongated toilet bowl. We would be happy to help. But first, we need to know the model number of the old Gerber toilet that you have, so we could give the correct recommendation for the tank. Thank you for visiting PlumbersStock- your one-stop online store for your plumbing needs. Have a nice day!
