
Would you like to have a direct chat with an admin to help with your shopping needs?
Mpn # | VFF6RW1YDS |
Weight | 1.00 lbs. |
Discount price available for a limited time, so order the Honeywell VFF6RW1YDS/M Three-Way 14" Flanged Resilient Seat Butterfly Valve (Full Cut Disk, Electron-Pneumatic Positioner, High Pressure Spring Return) here at PlumbersStock.com. Before you buy, make sure it has all the right features: this flanged valve comes with 3-way porting (an A-AB-B configuration), with a full cut disk (high close-off), up to 175 psi close-off temperature rating, the trim is nylon 11-coated disk, EPDM seat/seal, a Electron-pneumatic positioner actuator enclosure, and a High pressure pneumatic spring return actuator. The VFF6RW1YDS has a stainless steel valve stem that features an actuator which provides the perfect amount of torque required to put the valve in the shut-off position. The valve contains a cast iron disk which has a Nylon 11-Coating that protects the valve from corrosion and even lessens possible friction. With this design, it can be used for control of either hot water or chilled-water solutions. It even has a flow control characteristic which can be adjusted for equal ratio or percentage. When it comes to valve durability, the VFF6RW1YDS has a polyester-coated cast iron valve body that is built for wear and tear such as; tough weather conditions, chemical exposure, ultra-violet contact, scrapes, and impact protection. The construction of this valve makes it a fantastic choice for a chilled water system. If you're going to use this valve with a field or outdoor application, weatherproof covers are available in order to protect any electrical components. The Butterfly Valves operation plays a vital role in preventing condensation which can harm your chiller system. Honeywell butterfly valves are tightly packed and easy to control, yet skillfully built for long-lasting, reliable performance.
If you would like to be notified when we answer your question please log in or enter your email below. If not please leave the email blank and press submit thank you.
Hi! Thank you for posting your query about the Moen 155023 set screw. This set screw uses a 3/32" hexagonal wrench. We hope this information helps. You can purchase this set screw by clicking on "Add to Cart" and filling up the information needed. Thank you for choosing PlumbersStock. Enjoy shopping!
Ahoy! Thanks for your interest in the Moen 155023 screw kit. Yes, this set screw is what you're looking for. To order, simply click the "Add to Cart", enter the required information, and you'll be on your way. We thank you for choosing PlumbersStock. We are always happy to serve you! Happy shopping!
we have a moen model #87350esrs MotionSense faucet. The single handle works but is not attached secure to the body. I pulls away from the faucet body when in use. It does not leak - just loose. Do you know if this set screw is what we need to secure the handle to the faucet body? thanks for your reply.
Hello, there! Thank you for posting a query concerning the Moen 155023 set screw. This set screw is for the Moen 87519 single-handle kitchen faucet. For us to better assist you further, we need to know the model number of your towel bar so we can advise you of the correct set screw. You can let us know by calling our Customer Support at 435-868-4020 from 7 AM to 7 PM MDT (Mon-Fri) or sending us a picture of your faucet at support@plumbersstock.com so we can help identify it for you. They will be happy to assist you further. Thank you for choosing PlumbersStock to help you find answers to your plumbing question. Have a great day!
Hi, there! Thanks for posting your query here at PlumbersStock concerning the Moen 155023 set screw kit. Concerning its installation, you just need to insert the screw into a hole inside the faucet handle and tighten it with a 3/32" hex key wrench until it fits snugly. We hope this helps! Should you need further assistance, please let us know. Thank you, and have a nice day!