InSinkErator Power Series Contractor 333-W/C Garbage Disposal, 3/4 HP, With Cord, Black - 79848K-ISE

Ahoy! Thank you for posting a query about the Delta RP17730 diverter assembly. Our products, such as this diverter assembly, are not factory seconds. We assure you that here at PlumbersStock, we only sell products that are brand new. We have been in the industry for a long time and have developed good relationships with our suppliers. This allows us to get products from them at competitive prices, and pass the savings to you - our valued customers. Once you're all set to place an order for this RP17730 diverter assembly, simply click "Add to Cart" and fill in the required fields. Thank you for contacting PlumbersStock. Enjoy shopping, and have a great day!

Hola! Thank you for your inquiry about the Delta RP17730 diverter assembly. This diverter works with the Delta 2600 and 2800 series three-handle tub and shower faucets. For us to better assist you, please provide us with the make and model number of your walk-in tub. This way, we will be able to provide you with correct and accurate information regarding the diverter assembly that you are looking for. You can contact our Customer Service Department at 435-868-4020 from 7 AM to 7 PM MST (Mon-Fri) or through e-mail at support@plumbersstock.com. They will be more than happy to further assist you. Thank you for choosing PlumbersStock! Have a great day!

Hola! Thank you for your inquiry about the Delta RP17730 diverter assembly. Yes, and each diverter assembly also works with different fixtures. The Delta RP17730 is for use with Delta 3-handle tub and shower faucets while the Delta RP19653 (SKU: 69187) is a diverter for a Roman tub transfer valve. For us to better assist you, please provide us with the make and model number of your fixture. This way, we will be able to provide you with accurate information regarding the diverter assembly that you need. You can contact our Customer Service Department at 435-868-4020 from 7 AM to 7 PM MST (Mon-Fri) or through e-mail at support@plumbersstock.com. They will be more than happy to further assist you. Thank you for choosing PlumbersStock! Have a great day!

Hola! Thank you for taking an interest in the Delta RP17730 diverter assembly. To remove this diverter assembly, start by turning off the water supply to prevent any accidental spraying or leaks. Once the water is off, remove the handle and trim by loosening the set screw on the handle (usually located underneath or behind a decorative cap), then take off the escutcheon plate to expose the valve body. The diverter itself is typically threaded into the valve or press-fit, depending on the model. Using a flathead screwdriver or a pair of needle-nose pliers, gently grip and pull the diverter straight out. Be cautious not to scratch or damage the surrounding brass — using a rag between the tool and the part can help. If the diverter is stuck due to mineral buildup, apply a small amount of penetrating oil like PB Blaster and let it sit for 10–15 minutes, or lightly tap around the area to loosen it. After removal, inspect the cavity for debris or calcium deposits, which can be cleaned with vinegar and a soft brush. Before reinstalling or replacing the diverter, apply a bit of plumber’s grease to help it seat smoothly and prevent corrosion. A professional tip: if you live in a hard water area, treating mineral buildup ahead of time can make this job significantly easier and save wear on your tools. We hope this information helps. Thank you for reaching out to PlumbersStock, where customer satisfaction is always a priority. Enjoy shopping, and have a great day!