14" x 4" Radius Spiral Pipe Grille, Double Deflection, Half Scoop Extractor, Galvanized - Shoemaker RS34-SC-GALV-14X4

Hello there! Thank you for asking about the Moen 150259 part hose kit. Yes, it is very easy to install. You may follow these simple steps to install this hose kit on your faucet. Step one, you should feed the small part of the hose into the faucet spout. Step two, remove the protective cap on the end of the hose then slide on the doughnut shape weight. Step three, you should connect the pull-out hose to the faucet's dura lock quick connect system by simply insert the hose into the connector until you hear a click sound to make sure that the connection is securely attached to it. Step four, flush the system to remove any debris. Position the pull-out hose into the sink and turn on the faucet. Finally, attach the spray wand to the pull-out hose. To do it, you must thread the spray wand into the pull-out hose and tighten it with an adjustable wrench. Hope this helps. To purchase, just click the "Add to Cart" button, fill in the required fields, and we'll take care of the rest. Thank you for visiting PlumbersStock. Have a wonderful day!

Good day! Yes, the white cap on the end of this Moen 150259 Hose Kit is removable. The cap is designed to protect the brass nipple from scratches while it is being shipped. If you are referring to the black O-ring located on the brass nipple (at the end of the hose), unfortunately, Moen does not have a service kit available just for that part. According to them, you would need to replace the entire hose. However, if you're faucet is still covered under a warranty, the replacement parts needed to repair the fixture can be provided free of charge. It is best to contact the manufacturer at 1-800-289-6636 to know if you're faucet is still covered by a warranty or not. If it is not, you can purchase this Moen 150259 hose kit by clicking on Add to Cart and entering your zip code for shipping. Thank you for choosing PlumbersStock.com!

will this hose kit fit moen model 87045msrs ?

Ahoy! Thanks for your interest in the Moen 150259 hose kit. Yes, this hose kit will work with your Moen 87045MSRS kitchen faucet. Order yours now by simply clicking the "Add to Cart", enter the required information, and you'll be on your way. We thank you for choosing PlumbersStock. We are always happy to serve you! Happy shopping!

Hi, there! Thank you for your interest in the Moen 150259 hose kit. It's used for any of these Moen pull-out kitchen faucets: Moen 9125SRS, Moen CA87316W, and Moen 7585SRS. To begin the ordering process for this kit, please click the Add to Cart button, enter your zip code and your billing information, and we will take care of the rest. Thank you for choosing PlumbersStock! Have a great day and happy shopping!

Hi! We appreciate your inquiry about the Moen 150259. According to Moen, the outside diameter of the coupling of this hose is .845 inch and the thread size is 5/8 inch x 16 inches. We hope this helps you in connecting this hose to a homebrew wort chiller. Thanks for visiting PlumbersStock.com!