K-Rain 8 Station PRO-LC WiFi Enabled Indoor Irrigation Controller with 110V AC Plug Pack Transformer, Rain/Freeze Sensor Ready - 3108WID

Hey there! Thank you for your query on the K-Rain 3108WID indoor controller. The controller display going blank may be caused by either a disconnection from the primary AC power or damage to electronics due to electrical surge. If the former is the case, please check for tripped electrical breakers or fuses and if the electrical components are properly installed. Then, hire a licensed electrician to do the necessary fixes. While if the damaged electronics is the case, you can perform a controller RESET by inserting a paperclip into the reset hole. If no permanent damage occurred, the controller should function normally. However, if it has become faulty, the product must be returned to the manufacturer, along with the original invoice, description of any fault, and contact information. You can check out pages 30-31 of the instruction manual for reference. We hope this information helps. Thank you for contacting PlumbersStock! Have a nice day!

Hey there! Thank you for posting a query on the K-Rain 3108WID 8-station irrigation controller. No, this controller does not come with a rain/freeze sensor. What you need is either the K-Rain 3208-HRFS or 3208-WRFS rain/freeze sensor. However, both are not yet available on our website. Nonetheless, you can contact one of our knowledgeable customer support specialists at 435-868-4020 between 8:00 AM and 7:00 PM MST or via E-mail @ support@plumbersstock.com. There is a chance that we may be able to provide one for you from one of our many supply house partners. They will be happy to assist you further. Thank you for visiting PlumbersStock. Have a great day!

Hi, there! Thank you for your query about the K-Rain 3108WID irrigation controller. Yes, this indoor irrigation controller has an option to bypass irrigation schedule during rainy seasons with the help of a rain sensor, which stops automatic watering when sufficient precipitation has been reached. Please refer to page 5 of the user manual for more details. To purchase, simply click "Add to Cart," complete the required fields, and we’ll handle the rest. Thank you for choosing PlumbersStock. Have a wonderful day!

Hi, there! Thank you for your query about the K-Rain 3108WID irrigation controller. This controller has a single keyhole and two circular mounting holes at the back. To securely mount it on the wall, start by marking the spot where you want to mount the controller. Next, insert a suitable fastener for your wall type into the mark for the keyhole slot. Then, hang the controller so the fastener rests in the narrow part of the keyhole, ensuring it’s secure. Lastly, once the controller is level, add fasteners through the two lower circular holes to provide additional stability. This setup will keep the controller securely attached and properly aligned on the wall. For further information, you may refer to the user manual. When you’re ready to purchase, simply click "Add to Cart," complete the required fields, and we’ll handle the rest. Thank you for visiting PlumbersStock. Have a great day!