American Standard 1340.107.002 Pillar Tap Metering Faucet, 0.5 Gpm, Chrome

Product Features

• 0.5 GPM/ 2.27 LPM
• Monoblock with cast brass spout: 3-1/2" (89 mm) reach
• Vandal-Resistant Brass Construction and Spray: Durable - Excellent in high use applications
• Automatic Shut-off: Stops water and energy waste. Ideal for public restrooms where uncontrolled water usage is costly
• Meets ADA Standard: Requires less than 5 lbs. of operating force to initiate flow per ANSI A117.1
• Single Supply: For cold or tempered water
• Adjustable Flow Cycle
• Replaceable Valve Cartridge: Facilitates simple replacement.
• Flexible Supply Hose: With 3/8" Compression Connection
• Lead Free: Faucet contains = 0.25% total lead content by weighted average CODES AND STANDARDS These products meet or exceed the following codes and standards: ? ANSI A117.1 ? ASME A112.18.1 ? CSA B 125 ? NSF 61/Section 9 and Annex G
• Single handle design
• 22" long flex supply with 3/8" compression fitting
• Water Conserving 0.5 gpm Pressure-Compensating VR Non-Aerated Spray
• 10 second flow cycle. Factory set for a maximum of 0.09 gallon flow per activation
• Optional grid drain, mixing valve and deck plates available (sold separately)
• 5 Year Limited Warranty for Commercial Installations
• Meets CALGreen: Delivers 0.083 gallons per cycle which is a 59% water savings from CALGreen baseline
• Pressure Compensating Non-Aerated Spray: Provides a constant water flow of 0.5 gpm throughout the pressure range