UEi Test Instruments

Their quick growth and dedication to manufacturing quality products has allowed them to join the Kane Group, and now have sister companies globally (Canada and England). UEi meters provide the quality and efficiency that customers deserve. Quality, Great Service, Innovation and Value are the primary attributes of a quality company and their products that UEi strives to maintain.

Applications for UEi Instruments

• Oxygen and/or Carbon Monoxide levels
• Combustion on oil appliances (boiler or furnace)
• Positive/Negative Gas Pressure, Leak Detecting
• Sub Cool (refrigeration applications/appliances) and/or Heat
• Electrical Wires
• Insulation Resistance
• And more

UEi Products

• Clamp-on Meters include high quality items like the DL 389 and the DL 379, which come as single meters or in a kit. The CH3 UEI meter comes with a non-contact voltage tip and a work light.
• Digital Multimeters like the DM397 and the DM393, which both have true RMS, 1000 AC/CD volts and amps, and use batteries or fuses without breaking the calibration seal. UEi test instruments offer so much more.  For example, Analog Clamps and multimeters have from 9-21 ranges, from 300-1000 volts, and color-coded scale plates.
• Combustion Analyzer products like C75, C125, C127, C155, and C157 all come as singles, in kits, or in oil kits. The KM940 and KM900Plus both measure O2 and CO and have a large 4-line display. UEI's SPT1 has a high impact barrel and is made of stainless steel.
• Carbon Monoxide Detectors from UEI like the CO91 come in single form, or in a kit. One of the most essential UEi meters might be the CO71A, which has preset alarms, low battery indicator, and MAX capture.
• A/C and Refrigeration products include DMG100 and DMG200 both have up to 300 hours of battery life, oil contamination sensor, and are capable of infield calibration. UEi's SSM1 can calculate super-heat and sub-cool while measuring pressure and temperature.
• Indoor Air Quality tools such as the AQM4 has a four in one measure of CO, CO2, Temperature and RH minimums and maximums.
• Pressure Testers like the EM 201 comes in a single or in an SP Kit. UEI's EM151 has a triple scale that can be read in WG, mBar, and PSI and an auto power-off after 5 minutes without activity to save battery life.
• Leak Detectors include the CD100A and CD200 that both have a minimum detection of 50 PPM of methane, long 18" goosenecks for difficult to reach areas, and a 'tip-light' on the sensor tip to light up search area. Also among UEI meters, consider the RLD10, which has an 18 ½" probe and auto zeros when it is turned on.
• Infrared Thermometers have a wide temperature range. Some of the most popular UEi test instruments, the INF155, INF185, and INF215 all have laser targeting, backlight display, low battery indicators, 3-year warranty, and a holster. INF165 and INF195 both have a 12:1 distance to spot ratio. All DT temperature testers from UEi have MIN, MAX, AVG & Hold options, except 15A and 20A, which have only MIN and MAX. The PDT650, 550B and PDT550 also only have MIN and MAX options. These UEi meters include products like the DOT2A, which has a very high temperature rate of 200-550 degrees Fahrenheit, while the other thermometers' ranges are within -20-120 degrees F.
• Humidity and Air Flow products include the DAFM3 can measure air velocity, humidity and temperature. All DTH models can switch between Fahrenheit and Celsius. The THL1 and THL2 both allow 32,000 data points, instant or manual start-up, and long battery life.
• UEi also offers multiple Specialty Testers like the CLM100 that can measure copper and aluminum cables and the MW1AK that has an attached wand so it is easy to allow detection in small spaces. UEi electrical meters include ECT120 and ECTGFI, which both have an instant display of wiring conditions and can test 110V AC outlets. The ECT1K and the ECT690 test for the continuity of the wiring. Also from UEi, is the PET1 that can detect high and low AC voltage.
• Insulation Resistance devices have three man voltage ranges: 250, 500, and 1000. The DMEG3 and the IRT3 have many things in common like being fuse protected, having automatic post-test cable discharge, and a compact case to protect it from the weather.
• Utility Meters (UTL brand) like UTL33T, UTL260, and UTL7002 can all test AC and DC voltage. UEI also has accessories like adapters, batteries, clamps, filters, software and fuses for all UEi parts and kits.

Get Your New UEi Test Instrument at PlumbersStock.com

Quality products at wholesale prices are our business here at PlumbersStock. UEi is no exception, and the quality they provide in their testing equipment. If you have any questions about specialty tools, contact our professional staff and we can help answer your UEi meter needs.