Makita 2" Corded Rotary Hammer, Accepts Spline Bits - HR5000

Product Features

• All ball-and-needle bearing construction for longer tool life
• Powerful 11 AMP motor delivers 2,100 BPM for the most demanding applications
• Built-in clutch reduces gear damage by disengaging gears if the bit binds
• 2-mode operation for "Hammering Only" or "Hammering with Rotation" for multiple applications
• Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts resulting in up to 50% faster drilling
• Makita Motor Advantage engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life
• Automatic brush cut-off protects commutator from damage for longer tool life
• AC/DC switch for use with alternative power source
• Large comfortable grip swivels 360 Degrees for easy handling
• Spline type drive system for maximum power
• Factory grease packed for reduced maintenance
• Accepts Spline bits
• AMPS : 11
• Max. Capacity (concrete drilling) : 2"
• Max. Capacity (concrete drilling w/ core bit) : 5-7/8"
• Impact Energy (Joules) : 11.8 J
• Impact Energy (ft.lbs.) : 8.7
• Vibration (m/s) : 25
• Blows Per Minute : 2,100 BPM
• No Load Speed : 260 RPM
• Overall Length : 18-3/4"
• Cord Length (ft) : 8.2'
• Net Weight : 21.8 lbs.
• Bit Type : Accepts Spline shank
• Power Type : Corded
• Optimum Range (concrete drilling) : 5/8" - 1-3/8"
• Shipping Weight : 35 lbs.
• UPC Code : 088381-003360