Cleveland 42084 Chrome Handle Cap

Hello! Thank you for posting a question under our Irritrol RD600-INT-R - Rain Dial 6-Station Indoor Controller. In response to your inquiry, is your controller a standard RD600-INT blue face? If so, an OPEN code means essentially the same as a FUS code in the user guide of the newer RD600-INT-R series. It’s an electrically related failure with one of the stations outside as noted on page 28 of this User Guide. You might need to check the wiring and splices for short circuit or replace a defective solenoid. Hope this helps. Should you have further questions, please let us know. If you need assistance in creating an efficient irrigation system for your lawn and garden, PlumbersStock is offering that for FREE! Simply visit our Sprinkler Design Center to get started.

Hi! Thank you for asking about the Irritrol RD600-INT-R controller. We are sorry to hear that you are having difficulties with your unit. We highly recommend you call the manufacturer at 1-800-634-8873, M-F, 7:30 AM-2:30 PM PST while you are in front of the unit. To set the start time, place the function switch in the Set Programs position and select program A, B, or C. Then, turn the Dial to select Start Time 1 (2 or 3) and press the (+) or (-) button to set the time. Repeat the steps for additional start times and program as needed. When done, return the Dial to the Current Time position, then to the function switch, and lastly to the Run position. We hope this answer helps. To order this terminal controller, click the "Add to Cart'' button and supply the information needed. Thank you for contacting PlumbersStock and for the opportunity to be of service to you! We appreciate your patience and wish you a great day!

Good day! Thank you for posting your question in this RD600-INT-R rain dial. If the time displayed is wrong and it is flashing, a power outage probably happened and your battery failed to provide backup power. When you changed the battery and corrected the time, that solved the problem. For more information about troubleshooting, please take a look at page 35 of thisUser's Guide. Please don't hesitate to contact us if you have further questions about this product. Thank you for visiting PlumbersStock.com. Have a great day!

I dont have any display on the monitor. I checkd the power breaker and is on. Any ideas what to do?

Hi, there! Thank you for your interest in the Irritrol Rain RD600-INT-R station indoor controller. Did you mean the procedure on how to reset this indoor controller? If so, then, to reset, just place the function switch in the 'Switch Programs' position. Then, place the switch to select 'B'. While your AC power is still connected, remove the control module ribbon cable from the PC board socket. Open the battery compartment so you can also remove the battery. Press and hold the manual 'On' button. Lastly, before reinstalling the battery and reprogramming the controller, reattach the ribbon cable and let go of the manual 'On' button. If the reset is succesful, the display should show '12:00 AM'. If it won't, you need to restart the procedure again. For further details regarding the proper setup for your desired functions, please refer to this user's guide. Thank you for choosing PlumbersStock! Have a great day and happy shopping!